Skip to content Skip to sidebar Skip to footer
Página inicial / Before & After: Retro Star Inlay Table Restoration

Before & After: Retro Star Inlay Table Restoration

Postar um comentário

The incredible star inlay on this cool '60s tabular array sucked me right in, simply it needed a restoration of its beautiful veneer. Here's how to refinish timber veneer on a beautiful secondhand observe that might demand a piddling polishing. The finished effect was perfect for an earthy, cozy environment where warm timbers would fit right in.

Before and After- Retro Star Inlay Table Restoration View in gallery
retro table before renovation View in gallery
Clean the table before reno View in gallery

Structurally, this tabular array was in good shape, but the lacquer end was busted. The legs and base were fine, if in need of a polish, but the elevation had a heavy lacquer blanket that was bubbling and peeling everywhere.

Paint stripper table View in gallery

Before stripping and working with a veneered surface, you'll want to appraise how thick it is. I took a shut wait at the superlative and saw that information technology was a couple of millimeters thick. It was very thin, so I had to exist careful, but information technology wasn't so cardboard that it'd exist incommunicable to work with.

Restoration supplies and cost:

  • Old table
  • Bottle of pigment stripper and latex gloves
  • Inexpensive scraper
  • Sander and pads (120/240)
  • Varnish of choice: mine was matte poly + an oil topcoat.

My plan: Paint stripper and a light sand.

I've tried to sand through lacquer earlier, and I don't recommend it. The lacquer gums upwards the sandpaper, it takes forever and it gets messy. All that grit isn't very nice either. Paint stripper is worth it for dissolving heavy coatings, and it works fast.

Not-toxic citrus stripper is peachy for indoors, but otherwise I don't mind using regular paint stripper outdoors in a well-ventilated space. Wear gloves!

Non toxic citrus stripper View in gallery

Yous start scraping off the paint stripper when it bubbles the varnished surface – usually within minutes. This is what the table looked like after the showtime round. Not bad, but in that location were still plenty of shiny patches.

Second coat of paint stripper View in gallery

Sometimes, you might need a second coat of paint stripper to go the rest. Applying a second coat of pigment stripper worked well here – you can encounter that now it'southward properly stripped of all coatings.

Afterwards using the paint stripper – and cleaning the residue with methylated spirits – it was time to sand the surface. With such a thin veneer, I didn't desire to sand this table likewise hard.

Grit paper after renovation View in gallery

One pass with 120 dust paper, and my table was transformed. I was so excited to encounter the veneer! The grain of the perfectly-aligned pieces became credible.

Inlay table renovation View in gallery

I gave the top another sand at 240 and practical one coat of a light brown stain, in guild to lessen the contrast between the meridian and the already-stained legs. After that was the varnish: i glaze matte poly for protection, one coat fine buffing oil for shine. The oil topcoat can exist touched upwards without having to strip information technology all over again.

Here's the finished table, ready for use and looking astonishing.

Before and After- Retro Star Inlay Table Restoration Project View in gallery
Living room table renovation View in gallery

I beloved how this trivial tabular array turned out. It'south got a fun retro manner that fits with my woolly rugs and blankets, and the star inlay is gorgeous. You never know what you lot'll find secondhand – one person's trash can be a fine treasure indeed.

millernoth1970.blogspot.com

Source: https://www.homedit.com/retro-star-inlay-table-restoration/

Postar um comentário for "Before & After: Retro Star Inlay Table Restoration"